HomeDriveline Retail BlogSOLUTIONSMeasuring The Sales Value Of A Store Visit

Measuring The Sales Value Of A Store Visit

Whitepaper · October 2026

Measuring the Sales Value of a Store Visit

A 560-store controlled test at a national dollar-store chain, run with a top global CPG manufacturer. The same SKUs grew 14.2 percentage points faster in the stores Driveline serviced than in matched stores we did not visit.

Driveline Retail Merchandising · Program results through September 28, 2026

Results at a glance

+14.2
Percentage-point sales growth advantage on serviced SKUs
$5.69
Estimated incremental retail sales per $1 of service
1.99×
Contribution ROI at a 35% retail margin assumption
176,978
Units placed on shelf, May 11 to October 11, 2026

01 · The problem

The Question Every Brand Asks

Need proof that in-store service pays for itself? Most brands fund merchandising visits on trust more than on evidence. A rep stocks the shelf, the visit report says complete, and sales move for reasons nobody can separate: a promotion, a price change, a new distribution center, a hot week. When the budget review comes, the visit is a cost line with no revenue line beside it.

In May 2026, a top global CPG manufacturer and Driveline set out to put a number on that visit. The test runs inside a national dollar-store chain, in two Southeastern metro markets, with a dedicated Driveline team servicing a selected set of the manufacturer's items.

02 · The method

How We Measured It

A store visit only counts if you can see what happens without it. The design isolates the visit from everything else that moves sales.

01

Matched Store Groups

560 stores split into two groups of 280, with 140 of each group in each market. Group A received Driveline service. Group B received none and served as the comparison. Both groups shared the same markets, promotions, pricing, distribution centers, and data feeds.

02

The Same SKUs on Both Sides

One visit cannot move every one of the 1,000+ manufacturer items in a store. We measured the items our reps stocked in A stores and compared them with those same items in B stores.

03

Baseline-Adjusted Growth

Each group's sales were set against its own 13-week baseline, then tracked for 21 program weeks. The result is the gap between the two growth rates, which removes market-wide swings that hit both groups.

03 · The result

The Same SKUs Grew Faster With Driveline

Across 21 measured weeks, serviced SKUs in the A stores grew 22.4% over baseline. The same SKUs in the B stores grew 8.2%. The difference, 14.2 percentage points, is the estimated sales effect of the program.

Both markets moved in the same direction. Measured against its own comparison stores, one market showed a 9.9-point advantage and the other showed 14.4 points. The size differs by market, which is a reason to test more markets before assuming the same return everywhere.

A · Driveline serviced (280 stores)22.4%
B · Comparison, not serviced (280 stores)8.2%
+14.2 percentage points,
same SKUs, baseline-adjusted
Sales growth on serviced SKUs. 13-week baseline compared with 21 program weeks. Sales through September 28, 2026.

04 · The work

The Execution Behind the Result

A sales lift without proof of work is a coincidence. Every unit in the chart below is a recorded stocking event in our SMART PROJECT® platform, tied to a store, a date, and a rep.

4,473
Store visits across all 280 serviced stores
~40
Units placed per store visit
134 → 251
Average stores served per week, before and after July 13
~9,500
Units placed per week since mid-July
Units stocked per week, May 11 to October 5, 2026 (week starting Monday)
View the weekly data
WeekUnits stocked
Week of 5/11, 20265,489
Week of 5/18, 20265,906
Week of 5/25, 20265,591
Week of 6/1, 20265,490
Week of 6/8, 20266,186
Week of 6/15, 20265,530
Week of 6/22, 20266,618
Week of 6/29, 20265,960
Week of 7/6, 20266,799
Week of 7/13, 202611,813
Week of 7/20, 202610,800
Week of 7/27, 202610,228
Week of 8/3, 20269,629
Week of 8/10, 20268,495
Week of 8/17, 20269,208
Week of 8/24, 20268,625
Week of 8/31, 20268,758
Week of 9/7, 20267,681
Week of 9/14, 202612,372
Week of 9/21, 20268,366
Week of 9/28, 20268,672
Week of 10/5, 20268,762
Total176,978

Stocked units measure shelf placement, not incremental sales. We do not add them to the measured sales lift.

05 · The economics

Every $1 of Service Returned an Estimated $5.69

We valued the incremental units from the sales comparison at a standard per-unit retail value and set them against the full cost of recorded visits. Each $1 of program cost produced an estimated $5.69 in incremental retail sales.

Retail sales are not profit. At a 35% retail contribution margin, the program returned 1.99 times its cost, and net contribution after program cost was positive.

Read these numbers with their assumptions.

The 35% margin is a planning assumption for retail contribution. A manufacturer's own return depends on its net price, margin, and funding share, and needs its own calculation.

The sales window covers 21 measured weeks. Cost covers every recorded visit since launch. Future readouts align the two windows.

06 · What the data did not show

Full-Store Availability Was the Wrong Ruler

We also compared on-shelf availability across the full planogram assortment, about 274,000 item observations in each group. A stores and B stores both landed at 88.12%. The difference was 0.003 percentage points.

That flat result is useful. A one-hour visit works on a subset of the assortment, so availability across every item in the store dilutes the effect of a targeted service. We report it because it sets the next measurement: exception-based availability on the serviced SKUs only, in both groups, on aligned dates.

07 · What comes next

Converting the Comparison Stores

Service in the original 280 stores continues through November 7, 2026. The proposed next stage asks a sharper question: does performance improve when Driveline enters a store with a known baseline and comparison history?

Prepare

All 280 B Stores

While the current program runs

  • Freeze the same-SKU target set
  • Randomize start dates within each market
  • Capture dated availability snapshots

First wave

140 B Stores

First 12 full sales weeks

  • 70 stores in each market start service
  • 140 stores stay as comparison
  • Measure change against change

Second wave

Remaining 140 B Stores

Weeks 13 to 24, after a joint review

  • Add the remaining 70 stores per market
  • Track whether the gain holds
  • Keep holdout stores in any new market

Proposed design. Activation dates are set with the manufacturer and the retailer.

08 · For your brand

How to Run This Test on Your Own Items

You can apply the same design to any chain where you buy field service. These are the rules we follow.

  1. Hold back a comparison group in the same markets.Match store count, promotions, pricing, and distribution centers. Stores in a different market are not a comparison.
  2. Freeze the SKU list before service starts.Measure the items the rep touches, and measure the same list in the comparison stores.
  3. Set a baseline of at least 13 weeks.Compare growth against baseline, not raw sales, so seasonal swings cancel out.
  4. Count the work.Record visits, units placed, and stores served each week, so the sales result has a cause you can show.
  5. State the margin assumption.Report retail sales per $1 and contribution ROI separately, and build the manufacturer's own margin case from its own figures.
  6. Plan the next test before this one ends.Converting the comparison stores on a staggered schedule tells you whether the result repeats.

FAQ

Questions About the Study

Is the result statistically significant?

This paper reports an estimated program effect. We do not claim statistical significance. The proposed next stage randomizes start dates within each market and confirms statistical power before the test length is final.

Why measure serviced SKUs instead of every item in the store?

A visit works on the items the rep stocks. Measuring every item in the store mixes those items with hundreds the visit never touched. The full-assortment availability result in section 06 shows how much that dilutes the effect.

Do the 176,978 stocked units count as sales lift?

No. Stocked units show the work performed. The sales lift comes only from the A-versus-B comparison on the same SKUs.

Why are the manufacturer and the retailer not named?

We protect client confidentiality, so this paper describes both companies without naming them. Every figure comes from the program's reporting dashboard.

Can Driveline run this test for my brand?

Yes. We field about 15,000 W2 employees across all 50 states and track every visit in SmartPMX. Contact our sales team to scope a test in your chain and markets.

How much does retail merchandising increase sales?

In a 560-store matched test at a national dollar-store chain, stores serviced by Driveline grew the measured SKUs 22.4% against a baseline-adjusted 8.2% in comparison stores, a 14.2-percentage-point advantage over 21 program weeks.

What is the ROI of hiring a retail merchandising service?

In our 560-store matched test, the program generated an estimated $5.69 in incremental retail sales per $1 of service cost, or a 1.99x contribution ROI at a 35% retail margin assumption.

How do matched-store tests work for CPG brands?

A matched-store test compares the same SKUs across comparable serviced and holdout stores using a pre-program baseline. This helps account for market-wide changes affecting both groups and estimate the incremental effect of the service.

Methodology Notes

  1. Source: the program's reporting dashboard, snapshot of October 12, 2026. Sales through September 28, 2026. Stocking activity May 11 to October 11, 2026.
  2. Store groups: 280 serviced (A) and 280 comparison (B) stores, 140 of each per market. The B stores shared markets, promotions, pricing, distribution centers, and data feeds with the A stores.
  3. Growth rates compare 21 program weeks with a 13-week baseline on the SKUs Driveline stocked. Market-level results use each market's own B-store benchmark and do not sum to the pooled result.
  4. Retail sales per $1 uses a standard per-unit retail value. Contribution ROI assumes a 35% retail contribution margin and equals contribution divided by program cost.
  5. Availability compares the full planogram assortment from a single exception-summary snapshot. It is not a treatment estimate.
  6. Visit counts differ slightly by source: 4,473 store visits on the stocking report, 4,441 recorded visits used for program cost.

Measure. Prove. Scale.

Put a number on your next field program. We design the test, run the stores, and report the result.

Talk To Our Retail Execution Team Today